尖顶弯折三角翼气动特性研究

 对75°后掠三角翼在40%根弦处弯折引起的升阻特性及俯仰特性的 变化进行了低速风洞实验研究，初步分析了尖顶弯折对三角翼气动特性 的影响趋势. 得出尖顶弯折在低速大攻角下，可以使升力系数Cy增大、升阻比提高，并推迟失速攻角amax，从而说明顶部弯折对三角翼气动特 性的改善作用是显著的.     

氧化铝纤维含量对Al2O3f＋Cf／ZL109混杂复合材料耐磨性能的影响

利用挤压铸造法制备了Al2O3f Cf/ZL09短纤维混杂金属基复合材料，并探讨了炭纤维体积分数为4％时，Al2O3纤维含量变化对该复合材料耐磨性能的影响。结果表明：随着Al2O3体积分数增加，复合材料的摩擦系数逐渐增大，复合材料从轻微磨损到急剧磨损的临界转变载荷大幅度提高，并随Al2O3含量的增加而逐渐增大；在临界载荷以下，影响复合材料磨损率的Al2O3含量临界值为12％，当Al2O3含量低于临界值时复合材料磨损表面无明显剥落，而当Al2O3含量超过临界值后，复合材料磨损表面存在大量的剥落坑，磨损率增大。     

考虑竖向地震作用的振动控制及其优化研究

目前,MRD结构的分析通常只考虑水平地震动而不考虑竖向地震动的影响,地面的水平运动和竖向运动具有相关性,从而影响控制效果．因此对双向地震耦合作用下MRD结构的理论进行研究,建立动力分析模型并得出运动微分方程．以8层MRD结构为例进行地震反应分析,研究表明,考虑和不考虑竖向地震作用,MRD对结构均有良好的控制作用,但是竖向地震作用的存在,使结构各层的层间位移峰值有不同程度的增加,其增量随着竖向地震作用的增加而增加,因此建议在高烈度地区的建筑物考虑竖向地震作用对结构的影响．建立MRD结构优化设计模型,采用IHGA程序对结构进行优化设计．结果表明, MRD结构在各种工况下的各项地震反应均得到更好的控制．     

Analysis of 2-D thin structures by the meshless regular hybrid boundary node method

Thin structures are generally solved by the Finite Element Method (FEM), using plate or shell finite elements which have many limitations in applications, such as numerical locking, edge effects, length scaling and the envergence problem. Recently, by proposing a new approach to treating the nearly-singular integrals, Liu et al. developed a BEM to successfully solve thin structures with the thickness-to-length ratios in the micro- or nano-scales. On the other hand, the meshless Regular Hybrid Boundary Node Method (RHBNM), which is proposed by the current authors and based on a modified functional and the Moving Least-Square (MLS) approximation, has very promising applications for engineering problems owing to its meshless nature and dimension-reduction advantage, and not involving any singular or nearly-singular integrals. Test examples show that the RHBNM can also be applied readily to thin structures with high accuracy without any modification.     

杂交梁界面剪应力的理论分析和数值模拟

采用解析和数值方法研究FRP-混凝土杂交梁的界面应力问题。提出了杂交梁的新的力学模型和假设,克服了以往的分析模型中界面应力表达式非常复杂和界面应力的解析解与数值解相差较大的缺点,本文得到的FRP板加固梁的界面剪应力表达式与数值结果符合很好,并且具有简捷的表达式。利用有限元法研究了杂交梁各物理参数对界面剪应力的影响。研究表明,界面剪应力在FRP板的端部存在应力集中或应力奇性,这是造成杂交梁界面破坏的主要原因。这项研究对进行杂交结构的工程设计具有理论指导和参考价值。     

Preparation and characterization of novel polyimide‐silica hybrids

Polyimide‐silica (PI‐SiO₂) hybrids were prepared from a novel polyimide (PI), derived from pyromellitic dianhydride (PMDA), 1,6‐bis(4‐aminophenoxy)hexane (synthesized) and 4,4′‐oxydianiline. SiO₂ networks (5–30 wt%) were generated through sol–gel process using either tetraethylorthosilicate (TEOS) or a mixture of 3‐aminopropyltriethoxysilane‐PMDA‐based coupling oligomers (APA) and TEOS. Thin, free standing hybrid films were obtained from the respective mixtures by casting and curing processes. The hybrid films were characterized using Fourier transform infrared, ²⁹Si nuclear magnetic resonance (NMR), field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectrometry and atomic force microscopy (AFM) techniques. ²⁹Si NMR results provide information about formation of organically modified silicate structures that were further substantiated by FE‐SEM and AFM micrographs. Contact angle measurements and thermogravimetric thermograms reveal that the addition of APA profoundly influences surface energy, interfacial tension, thermal stability and the residual char yield of modified hybrids in comparison to those obtained by mixing only TEOS. It was found that reduced particle size, efficient dispersion and improved interphase interactions were responsible for the eventual property enhancement. Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation and Characterization of PMMA/MMT Organic-Inorganic Hybrid Materials via RAFT Polymerization

In this article, the poly(methyl methacrylate)/montmorillonite (PMMA/MMT) organic-inorganic hybrid materials were prepared by conventional free radical polymerization and reversible addition-fragmentation chain transfer (RAFT) polymerization, respectively. The kinetics comparison of these two polymerizations was studied. The PMMA/MMT hybrid materials were characterized by gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). According to these results, we knew that the polymerization behavior of MMA showed controlled/living radical polymerization (CLRP) characteristics under the control of RAFT agent. The incorporation of RAFT agent and MMT nanoparticles improved the thermal properties of polymers, and the thermal stability of polymers increased with increasing content of MMT nanoparticles. The structures and morphologies of PMMA/MMT hybrid materials were characterized by FT-IR, XRD and TEM. These results showed that the MMA monomer can be initiated and propagated in the clay layers of MMT via the control of RAFT agent, and then the exfoliated structure was obtained for the hybrid materials.     

Preparation of PEO-b-PPO-b-PEO/α-cyclodextrin supramolecular hydrogels hybridized with exfoliated graphite nanoplates

Abstract

In this work, an effective method was developed to prepare novel PEO-b-PPO-b-PEO (EPE)/α-cyclodextrin (α-CD) supramolecular hydrogels containing exfoliated graphite nanoplates (xGNPs) by mixing an aqueous solution of α-CD with an aqueous dispersion of xGNPs at the presence of amphiphilic EPE copolymer. The EPE copolymer played three important roles in the preparation process: (1) as an exfoliating agent to break expanded graphites into xGNPs under ultrasonication, (2) as a dispersant to stabilize xGNPs in the aqueous solution, and （3）as a component to form the inclusion complexes with α-CD. The resultant xGNPs/EPE/α-CD hybridized hydrogels were characterized by scanning electron microscopy, wide-angle X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy, which confirmed not only the formation of supramolecular hydrogel structure but also the homogenous dispersion of xGNPs in the hydrogel matrix. It was found that the existence of xGNPs can accelerate the speed of gel formation in comparison with that of the native EPE/α-CD hydrogel. Additionally, the water-retention ability and the release behavior of vancomycin hydrochloride for the xGNPs/EPE/α-CD hybridized hydrogels were investigated.     

纵磁作用下真空电弧单阴极斑点等离子体射流三维混合模拟

真空电弧的特性直接受到从阴极斑点喷射出的等离子体射流的影响,对等离子体射流进行数值仿真有助于我们深入了解真空电弧的内部物理机制.然而,磁流体动力学和粒子云网格仿真方法受限于计算精度和计算效率的原因,无法有效地应用于真空电弧等离子体射流仿真模拟.本文开发了一套三维等离子体混合模拟算法,并在此基础上建立了真空电弧单阴极斑点射流仿真模型,模型中将离子作宏粒子考虑,而电子作无质量流体处理,仿真计算了自生电磁场与外施纵向磁场作用下等离子体的分布运动状态.仿真结果表明,单个阴极斑点情况下真空等离子体射流在离开阴极斑点后扩散至极板间,其整体几何形状为圆锥形,离子密度从阴极到阳极快速下降.外施纵向磁场会压缩等离子体,使得等离子体射流径向的扩散减少并且轴线上的离子密度升高.随着外施纵向磁场的增大,其对等离子体射流的压缩效应增强,表现为等离子体射流的扩散角度逐渐减小.此外,外施纵向磁场对等离子体射流的影响也受到电弧电流大小的影响,压缩效应随电弧电流的增加而逐渐减弱.